Topband: question

[Gary Smith]

I can't help about BOG questions but... 
For those who do not read Spanish (or most 
other languages) you can find out what you 
can not understand, here:

https://www.google.com/webhp?sourceid=chro
me-instant&ion=1&espv=2&ie=UTF-8#q=transla
te

It is an on-line translator. Here is what 
it translates that our friend Luis asked:

Hi, I have several questions, I am 
interested in setting up antennas
from BOG reception antennas in a key 
RCS-10, I would like to place on
the BOG's same key 6 and 2 Beverages I 
already own, each Beverage is also 0
Grades approx 600 feet that look to the 
USA and to Europe at 45 degrees 700
feet.

I would like the BOG's were cut and 
functioned for 40-80-160
between Good and Very Good I know it 
excellent for the 3 bands is almost
impossible.

They can be placed in the same switche all 
antennas?

As'd better feed them with 59 or RG6 RG?

The cable from the key to the radius is 40 
meters RG 59 or better with
RG6?

I know that each antenna must place a rod 
to ground, I can Copper tube to about 1.50 
meters?

I use duplex Bafles wire gauge 20 or 22 
that is right or should be
more thick?

How far should I place each transformer to 
not interact or being fed antennas key 
interaction is reduced?

For now these are the questions that I 
have to do.

Thank you very much and I look forward to 
the answers.

Sincerely

HK6P
LUIS

PD was experimentacion but if anyone knows 
more and can save money why not consult 
those who know


> Buenas, tengo varias preguntas, estoy interesado en montar unas
> antenas de recepción BOG en una llave de antenas RCS-10, me gustaría
> colocar en la misma llave 6 BOG's y 2 Beverages que ya poseo, cada
> Beverage esta asi 0 Grados 600 pies esa mira aprox a la USA y hacia
> Europa a 45 grados 700 pies.
> 
> 
> 
> Me gustaría que las BOG's fueran cortadas y funcionaran para
> 40-80-160 entre Bien y Muy Bien yo se que excelente para las 3 bandas
> es casi que imposible.
> 
> 
> 
> Se pueden colocar en el mismo switche todas las antenas?
> 
> Como sería mejor alimentarlas con RG 59  o con RG6?
> 
> 
> 
> El cable que va de la llave a el radio mide 40 metros mejor RG 59  o
> con RG6?
> 
> 
> 
> Yo se que a cada antena hay que colocarle una varilla a tierra, la
> puedo hacer de tubo de Cobre de unos 1.50 metros?
> 
> 
> 
> Yo uso cable duplex de Bafles calibre 20 o 22 ese esta bien o debe ser
> mas grueso?
> 
> 
> 
> A que distancia debo colocar cada transformador para que no se
> interactuen o por ser alimentado con la llave de antenas la
> interaccion se reduce?
> 
> 
> 
> Por ahora esas son las preguntas que tengo para hacer.
> 
> 
> 
> Muchas gracias y quedo a la espera de las respuestas.
> 
> 
> 
> Atentamente
> 
> 
> 
> HK6P
> 
> LUIS
> 
> 
> 
> PD yo se experimentacion pero si alguien sabe mas y se puede ahorrar
> dinero por que no consultar a los que saben
> 
> Hi, I have several questions, I am interested in setting up antennas
> reception BOG in a key antenna RCS-10, I would like to put in the same
> key 6 BOG's and 2 Beverages I already own, each Beverage is also 0
> degrees to 600 feet that look about the USA and Europe at 45 degrees
> to 700 feet.
> 
> 
> 
> I would like that the BOG's were cut and functioned for 40-80-160
> between Good and Very Good was excellent for the 3 bands that is
> almost impossible.
> 
> 
> 
> They can be placed in the same Swiche all antennas?
> 
> As it would be better to feed them with 59 or RG6 RG?
> 
> 
> 
> The cable from the key to the radius is 40 meters RG 59 or better RG6?
> 
> 
> 
> I know that each antenna must place a ground rod, I can make a copper
> tube 1.50 meters?
> 
> 
> 
> I use Bafles duplex wire gauge 20 or 22 that is right or should be
> thicker?
> 
> 
> 
> How far should I place each transformer to not interact or be fed
> antennas key interaction is reduced?
> 
> 
> 
> For now these are the questions that I have to do.
> 
> 
> 
> Thank you very much and I look forward to the answers.
> 
> 
> 
> Sincerely
> 
> 
> 
> HK6P
> 
> LUIS
> 
> 
> 
> PD was experimentacion but if anyone knows more and can save money by
> not consult those who know _________________ Topband Reflector
> Archives - http://www.contesting.com/_topband