Topband: WireSpear antenna for topbands

[Eugene Popov /RA0FF/]

Alex UA4WI  modeled the antenna for my specific conditions.
If you know the MMANA program for antenna modeling, I can send a file.
Most of the answers in this figure are from my Twitter
see

https://pbs.twimg.com/media/DTJ5rcRV4AAlhKy.jpg  


73! de Eugene RA0FF
http://www.qsl.net/ra0ff/

>Пятница, 12 января 2018, 12:44 +11:00 от Mike Waters <mikewate at gmail.com>:
>
>Well, this is certainly different. At first glance, it appears that each
>section capacitively couples to the next one.
>
> - Have you modeled this?
> - What is the advantage as compared to other common 160m antennas?
> - And most importantly, What's the pattern and gain?
>
>73, Mike
>www.w0btu.com
>
>On Thu, Jan 11, 2018 at 6:49 PM, Eugene Popov /RA0FF/ via Topband <
>topband at contesting.com > wrote:
>
>> Since the fall of 2017 I have been experimenting with a new type of
>> antenna, which I called WireSpear (WS).
>>
>_________________
>Topband Reflector Archives -  http://www.contesting.com/_topband