Topband: Beverage F/B using oscillator

[Ashraf Chaabane]

Hi All,

I used a 1.843 oscillator to check NA beverage F/B. The mesurements were
taken 160m away from each end of the antenna. Noise level was constant. I
had 4 dB difference between front and back signals.

Is that what I should expect? Is 1 wavelength distance enough to do this
experience?
This will be repeated with different terminations and I want to make sure
I'm doing it correctly. It will also be applied on the newly installed BOG
to determine optimum length.

Tnx and see you on the air!
-- 
Ash ~ 3V8SF
<http://www.kf5eyy.info/>Topband: *http://www.kf5eyy.info/topband.htm
<http://www.kf5eyy.info/topband.htm>*
Phone/SMS/Whatsapp: (+216) 22670026
Skype: kf5eyy