Topband: Beverage F/B using oscillator

[F Z_Bruce]

Good information.
Finding the best BOG F/B.
I use an model  MFJ-5014  white noise generator off the 'back' of the BOG antenna.  Then tune the receiver to find the 'minimum noise' signal  frequency.    Adjust the BOG antenna length to bring it into 160 meters..
Care must be taken not to create a neighborhood  noise problem.   

73
Bruce-k1fz




On Tue, 9 Oct 2018 09:07:42 +0100, Ashraf Chaabane  wrote:

Hi All,

I used a 1.843 oscillator to check NA beverage F/B. The mesurements were
taken 160m away from each end of the antenna. Noise level was constant. I
had 4 dB difference between front and back signals.

Is that what I should expect? Is 1 wavelength distance enough to do this
experience?
This will be repeated with different terminations and I want to make sure
I'm doing it correctly. It will also be applied on the newly installed BOG
to determine optimum length.

Tnx and see you on the air!
-- 
Ash ~ 3V8SF
Topband: *http://www.kf5eyy.info/topband.htm
*
Phone/SMS/Whatsapp: (+216) 22670026
Skype: kf5eyy
_________________
Topband Reflector Archives - http://www.contesting.com/_topband