Topband: Rx splinter

[George Dubovsky]

Shameless plug: if anyone needs a new Mini-Circuits ZSC-2-1-75 (different
package, still BNC connectors), I have a bunch of them for $15 each plus
shipping. Change one internal chip resistor, and it's a very good 50 Ohm
splitter/combiner too.

73,

geo - n4ua

On Sat, Feb 2, 2019 at 4:35 PM Phil Duff <na4m at suddenlink.net> wrote:

> Fred KE7X’s K3 book (pg 162) suggests the Mini-Circuits ZFSC-2-1-75 so I
> picked up a couple used ones on eBay some years ago. These have some
> isolation between output ports.
>
> Have been to be working fine for me.
>
> 73 Phil NA4M
>
> 73
> > On Feb 2, 2019, at 2:04 PM, Rudy Bakalov via Topband <
> topband at contesting.com> wrote:
> >
> > I use Mini-Circuits Z99SC-62
> >
> > https://www.minicircuits.com/pdfs/Z99SC-62-S+.pdf
> >
> > Rudy N2WQ
> >
> > Sent using a tiny keyboard.  Please excuse brevity, typos, or
> inappropriate autocorrect.
> > _________________
> > Searchable Archives: http://www.contesting.com/_topband - Topband
> Reflector
>
> -. .- ….- --
> Phil Duff          na4m[at]suddenlink[dot]net
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> _________________
> Searchable Archives: http://www.contesting.com/_topband - Topband
> Reflector
>