Topband: Rx splinter

[Michael Walker]

Some cable tv splitters will work below 2mhz. 

You’ll need to test it to be sure. 

Mike va3mw

Sent from my iPad

> On Feb 2, 2019, at 4:42 PM, George Dubovsky <n4ua.va at gmail.com> wrote:
> 
> Shameless plug: if anyone needs a new Mini-Circuits ZSC-2-1-75 (different
> package, still BNC connectors), I have a bunch of them for $15 each plus
> shipping. Change one internal chip resistor, and it's a very good 50 Ohm
> splitter/combiner too.
> 
> 73,
> 
> geo - n4ua
> 
>> On Sat, Feb 2, 2019 at 4:35 PM Phil Duff <na4m at suddenlink.net> wrote:
>> 
>> Fred KE7X’s K3 book (pg 162) suggests the Mini-Circuits ZFSC-2-1-75 so I
>> picked up a couple used ones on eBay some years ago. These have some
>> isolation between output ports.
>> 
>> Have been to be working fine for me.
>> 
>> 73 Phil NA4M
>> 
>> 73
>>> On Feb 2, 2019, at 2:04 PM, Rudy Bakalov via Topband <
>> topband at contesting.com> wrote:
>>> 
>>> I use Mini-Circuits Z99SC-62
>>> 
>>> https://www.minicircuits.com/pdfs/Z99SC-62-S+.pdf
>>> 
>>> Rudy N2WQ
>>> 
>>> Sent using a tiny keyboard.  Please excuse brevity, typos, or
>> inappropriate autocorrect.
>>> _________________
>>> Searchable Archives: http://www.contesting.com/_topband - Topband
>> Reflector
>> 
>> -. .- ….- --
>> Phil Duff          na4m[at]suddenlink[dot]net
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> _________________
>> Searchable Archives: http://www.contesting.com/_topband - Topband
>> Reflector
>> 
> _________________
> Searchable Archives: http://www.contesting.com/_topband - Topband Reflector