Topband: YCCC 9 circle/5 square

[Mike VE3CKO]

There seems to be no controller board available, just the pre-amp, 
switching and phasing boards. Did I miss something?

    RX-amps, you will get 10 pieces for 20 euro.
    Switch-board you will get 5 pieces for 20 euro.
    Phase board you will get 5 pieces for 20 euro.

    https://www.pi4cc.nl/tech-info/rx-array/iwantone/

If your putting an order together, count me to split up.

73, Mike Kovacich - VE3CKO

On 2/19/2019 2:03 PM, David Olean wrote:
> Mike,
>
> You can get boards from PI4CC HF club in the Netherlands. The problem 
> is that you get more boards than one person needs. The boards are 
> coming from China. I think it is a shipping situation. You can get 10 
> preamp boards and then five of the switching/phasing boards and five 
> of the controller board.  I am looking to pool an order for a nine 
> circle array, so I need ten preamps (one spare) and a single switcher 
> and a single controller. I don't want or need five!  Even splitting it 
> two ways is a good deal for the cost.  (20 EU for five ) Check out the 
> page.
>
> https://www.pi4cc.nl/tech-info/rx-array/controller/
>
>
> Dave K1WHS
>
> On 2/19/2019 5:40 PM, Mike VE3CKO wrote:
>> I see the YCCC 9 circle/5 square kits are no longer available from DX 
>> Engineering. Is there somewhere to buy the kits or at least some key 
>> parts like the PCBs?
>>
>
>