Topband: Coax for Top-band beverage antenna

FZ Bruce k1fz at twc.com
Thu Sep 19 14:30:22 EDT 2019


Different location, different problems. Use the good stuff, to avoid
being surprised.
73Bruce-K1FZ

	-----------------------------------------From: "Jeremy Maris" 
To: topband at contesting.com
Cc: 
Sent: Thursday September 19 2019 1:40:33PM
Subject: Re: Topband: Coax for Top-band beverage antenna

That depends upon the length of the feedline: cheap copper plated
satellite RG6 has a *lot* of attenuation at 2MHz, as much as 3.6dB per
100m

 We have a 750m coax feed to our beverages and attenuation DOES matter
on long feed lines. We had ~ 25dB !

 http://www.contesting.com/_topband [1] - Topband Reflector
 > 
 > _________________
 > Searchable Archives: http://www.contesting.com/_topband [2] -
Topband Reflector

 _________________
 Searchable Archives: http://www.contesting.com/_topband [3] - Topband
Reflector
 

Links:
------
[1]
http://lists.contesting.com/archives//html/Topband/2011-05/msg00027.html
http://lists.contesting.com/archives//html/Topband/2011-05/msg00027.html
 /> 
 Caveat emptor.
 
 Jeremy G3XDK/G4AQG
 
 
 > On 19 Sep 2019, at 17:57, K4SAV <RadioXX at charter.net> wrote:
 > 
 > Don't worry about feedline loss for a Beverage. A few dB loss isn't
going to make any difference at all. You can worry about feedline loss
for transmit antennas, not for receiving antennas.
 > 
 > Jerry, K4SAV
 > 
 > 
 > On 9/19/2019 10:17 AM, Kevin Shea via Topband wrote:
 >> I have read that the skin effect at 2 MHz may be deeper than the
copper coating on a copper covered steel inner conductor of most RG6
cables. Thus, as I plan for long cable runs back from my (to be
installed) Beverages I am thinking I need either solid copper, solid
aluminum,. or copper covered aluminum for my RG6 coax. So the question
is am I wrong in this understanding?
 >> Also, does the shield matter? It's not very thick so does a foil
and 60% aluminum shield do the job? Or should I be looking at a foil
and 95 percent copper shield like the Belden 1694.
 >> I know it may not be too material but I want to make an informed
decision.
 >> Thanks! and
 >> 73,
 >> Kevin, N9JKP
 >> _________________
 >> Searchable Archives: </br<></a><a href=
[2] http://www.contesting.com/_topband
[3] http://www.contesting.com/_topband



More information about the Topband mailing list