Topband: Rohn 25 Vertical questions.

[Mail 10]

I am planning a similar installation, using Deeco mast sections (6' x 
10"). I have 20 of these, used of course. I don't think they have been 
manufactured for decades. Sections interface with pin and socket, with 3 
x 1/2" bolts between plates on each end.

Will also be strapping across the joints, as I know what a PITA 
intermittent connections are.

It will be a radiating mast with no other antennas on top, apart from a 
parallel wire for 80 m operation.

Erection won't commence until at least later in Spring, as the ground is 
just so wet now, after one of the wettest years we've had.

73, Luke VK3HJ

On 19/08/2020 4:06 am, Ron WV4P wrote:
> Howdy All,
>
> I'm getting ready to put up a Rohn 25 Insulated Base ~1/4 wave vertical.
> (115') and I'd like to get some advice if possible.