Topband: PL259 type connectors for RG11

[Artek Manuals]

My go to guy for Silver-Teflon PL-259 and� Amphenol. Good selection of 
Solder and Crimp ON ...Also sells those hard to find heavy duty crimp tools

https://www.ebay.com/str/n5iawrfcommunications


Cant recommend him enough

Dave
NR1DX

On 4/8/2021 3:22 PM, Raymond Benny wrote:
> I'm in the process of building a vertical phased antenna system for 
> 80m and
> 160m. I am looking to purchase some crimp type connectors to build the
> phasing lines but have not found any. RF Parts does not have them.
>
> Somewhere online, it was suggested I use the typical RG8 /213 crimp-on
> connector instead and wonder if this is OK? I do know that the center
> conductor is smaller in diameter than common RG8/213 cable. Would this 
> make
> a difference? It seems to me that in the past I did use the standard PL259
> and soldered the center conductor and braid, but I'd rather use crimp-on
> type connectors instead.
>
> Any thoughts or other sources for RG11 type PL259 connectors? I did try
> google and eBay, but they all ended up showing either RG6 or 'N' type
> connectors.
>
> Ray,
> N6VR/W7YA
> _________________
> Searchable Archives: http://www.contesting.com/_topband - Topband 
> Reflector

-- 
Dave Manuals at ArtekManuals.com www.ArtekManuals.com


-- 
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus