Rohn 25 bolts

[Howard Brainen]

My 14 sections of Rohn 55 were used when I got them and
some of the bolts were in pretty bad shape.  It wasn't corrosion
as much as being messed up from hammering in through
the holes in the sections.  I simply took one to a local stainless
supplier (Thunderbolt and Nut in Richmond, CA) and had him
sell me several boxes of stainless replacements for the bolt
and nut.  No problems in seven years.

73, Howard WZ6Z
----------
> From: AA4NC@aol.com
> To: towertalk@contesting.com
> Subject: Rohn 25 bolts
> Date: Monday, December 16, 1996 4:31 PM
> 
> I need to replace the bolts in a  25G tower. I need to find a better type
of
> bolt, that won't rust so quickly. The Rohn tower doesn't mention what
type of
> bolts to use. Since the stock Rohn bolts didn't last too long, I was
thinking
> about stainless. Is there a problem with this? What is the correct size?
> 
> Thanks / Happy holidays,
> 
> Will 
> 
> --
> FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
> Submissions:              towertalk@contesting.com
> Administrative requests:  towertalk-REQUEST@contesting.com
> Problems:                 K7LXC@contesting.com
> Sponsored by Akorn Access, Inc & KM9P

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 K7LXC@contesting.com
Sponsored by Akorn Access, Inc & KM9P