Asynchronous Balun Correction

John Brosnahan broz@csn.net
Mon, 21 Oct 1996 14:30:19 -0600


>Be sure to use the correct velocity factor for your RG-11 and RG-213:
>
>solid poly      = .66
>Belden foam= .78
>PTFE             = .80
>


Fred, minor point but solid PTFE velocity factor is .694.  It is only in
the air/PTFE (tape, spline, foam, etc) that the velocity factor gets into
the region of  .75 to .90.  So if it isn't solid PTFE you had better check
the specs or measure the VF yourself.

John  

John Brosnahan   W0UN
24115 County Road 40
La Salle, CO 80645

Radio Contesting IS a CONTACT sport!


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 K7LXC@contesting.com
Sponsored by Akorn Access, Inc & KM9P