wiretalk

[Frank Donovan]

Barry,
I purchased two thousand feet of #12 stranded (19 strands) copperweld
wire from "The Wireman" several years ago.  Only three months later I
removed one of the antennas and discovered significant evidence of rust!
A year later the rust was extensive and strands were broken in many
places along the length of the wire.  I complained to "The Wireman" and
they replaced all 2000 feet with a tinned copperweld 19 strand wire.  I'm
haven't examined this wire lately, so I'm not sure if it has also begun
to rust!

Ten years ago I acquired several thousand feet of surplus rhombic wire.
This is three strands of #12 copperweld.  Now I wish I hadn't passed up
the opportunity to purchase several thousand additional feet!   Its the
best antenna wire I've ever used.

73
Frank
W3LPL
donovanf@sgate.com

 On Wed, 23 Oct 1996, Barry Kutner wrote:

> I've been using a #14 stranded (7 strands) copper clad, purchased 
> from RF Connection of MD. Is it lousy copper plating, rubbing of the 
> strands as they flap in the breeze, or something else?


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 K7LXC@contesting.com
Sponsored by Akorn Access, Inc & KM9P