[TowerTalk] Crank Up Tower -- Antenna Side Arms?

[Leikhim, Joe]

I am in the process of erecting my US Tower TX489MDPL. The primary 
antennas will be an AZ/EL satellite array mounted at top with a 6 meter 
yagi mounted below.

I have a discone antenna and TV antenna which I would like to mount 
below the upper antennas. These antennas will not be rotated. I need to 
build or buy some sort of side arm assembly which will extend out and 
extend downeard below the top of the upper section so that the antennas 
do not interfere with the satellite array and 6 M horizontal Yagi. 

Obviously this bracket must attach at the top like the coax side arms 
and cannot interfere with antennas above or the lowering of the tower. 
Has any one else seen a good configuration to do this?

I am considering using some UniStrut to fabricate this if I cannot find 
a suitable off the shelf solution.

Any pros or cons to using UniStrut on a tower?? Can I buy galvanized 
UniStrut??
-- 
Joe Leikhim
Jleikhim@nettally.com

"tv dinner by the pool, 
i'm so glad i finished school" -F.Zappa 1967

"The Revolution will NOT be televised" -Gil Scott Heron


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com