[TowerTalk] Coax sealing

[SavageBR@aol.com]

When I use the coax sealing putty, I first mask the coax on each side of the
connector with masking tape. Then I spray WD40 on the connectors (connected
together). Then I remove the masking tape which kept the WD40 off the coax
cable. Then I install the putty and seal each side to the coax cable. When it
is necessary to remove the stuff, it comes off easy without ever sticking to
the connectors!!

Bruce  AA4Z

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search