[TowerTalk] Open Wire Entry To Shack?

[Kc4zum@aol.com]

In a message dated 97-08-29 14:13:33 EDT, jmaass@freenet.columbus.oh.us
(Jeffrey Maass) writes:

<< I might be able to replace a pane with plexiglas if necessary, but I'm
 looking for alternaties to this (multiple layers of glass). >>

I have a 18" x 30" aluminum frame window behind my desk where my shack is,
one of the old crank out type.  I got a piece of thick plexiglass cut to the
exact size of the pane.  The window glass is only held in by shims so prise
off the shims, slip out the glass, put in the plexiglass, chalk around it and
replace the shims.  Now you can drill appropriate holes for coax, and put
brass studs through the plexiglass for your open wire feed through.

73, Harvey KM4JA


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search