[TowerTalk] Hard line connectors

[K7LXC@aol.com]

In a message dated 97-03-20 17:47:36 EST, n3huv@juno.com (Glenn A
Biggerstaff) writes:

> Then you
>  take an empty 38 pistol shell and punch out the primer with a small punch
>  and solder it to the inner conductor .  Take a 3/8 inch piece of #12 or
>  #14 solid copper wire  and put it in the hole where the primer came out
>  and solder it in place. Then  solder a SO 239 panel mount connector to
>  the wire in the  pistol shell.

     This technique recommended for 'big guns' only.

73,  Steve   K7LXC

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Sponsored by:             Akorn Access, Inc. & N4VJ / K4AAA