[TowerTalk] Hard line connectors

[Bob Morris]

K7LXC@aol.com wrote:
> 
> In a message dated 97-03-20 17:47:36 EST, n3huv@juno.com (Glenn A
> Biggerstaff) writes:
> 
> > Then you
> >  take an empty 38 pistol shell and punch out the primer with a small punch
> >  and solder it to the inner conductor .  Take a 3/8 inch piece of #12 or
> >  #14 solid copper wire  and put it in the hole where the primer came out
> >  and solder it in place. Then  solder a SO 239 panel mount connector to
> >  the wire in the  pistol shell.
> 
>      This technique recommended for 'big guns' only.
> 
> 73,  Steve   K7LXC
> 
> --
> 

Naa.... 2 1/4" for 44 Mag (and 425 kw)....

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Sponsored by:             Akorn Access, Inc. & N4VJ / K4AAA