[TowerTalk] fitting rotors into 25G and HDBX

Bill Turner wrt@eskimo.com
Fri, 02 Jan 1998 05:30:18 GMT


On Thu, 1 Jan 1998 23:04:47 -0500 (EST), "Charles H. Harpole"
<harpole@pegasus.cc.ucf.edu> wrote:

>The T2X will go inside 25G at the rotor shelf factory placement point.
>Also, I turned my T2X every way but loose to get it inside the #3 top
>section of a HDBX and finally gave up.  The next day, KU4HZ arrived,
>climbed up and slipped the T2X right inside the HDBX immediately.  
>Moral:  u gotta try and try, or you gotta not be space relations
>handicapped.
_______________________________________________________________
I had the same problem back in '92 trying to put a T2X in a Rohn HDBX.
I finally found I could do it by removing the rotor plate and turning
it upside down.  This gave about one inch more clearance which was all
that was needed.  When I called the Rohn factory about it they said a
T2X won't fit into an HDBX, but they were interested in the upside
down business and would look into it.  I never heard back from them.  

I wonder if your HDBX is the same as mine.  What year was it made?

73, Bill W7TI


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search