[TowerTalk] TS-940 problem help please

[pramey@smtplink.ram.com]

     Is it in general coverage mode?  My Icom actes the same way when in 
     general/out of band mode.
     
     Paul, WG0G/W2


______________________________ Reply Separator _________________________________
Subject: [TowerTalk] TS-940 problem help please
Author:  K7LXC@aol.com at smtplink-rammob
Date:    1/28/98 3:49 PM


     I haven't used my TS-940 much recently but I decided I wanted to listen
to 20M the other day so I hit the power switch. It came on and the rx worked 
just fine. But it doesn't transmit. No output power, no swr, no relays, no 
nothing. I turned it on and off several times and realized that I didn't hear 
any of the relay latching that I usually hear. When I hit the transmit button, 
I don't hear any relays clicking there either. The manual is no help. I've 
tried different bands and modes but nada. It's always worked before.
     
    I would appreciate any help. I can always send it out for repair but was
hoping to get a little closer to the problem before I ship it out. 
     
73 and tnx,  Steve  K7LXC, QCAO
     
     
     
--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html 
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com 
Problems:                 owner-towertalk@contesting.com 
Search:                   http://www.contesting.com/km9p/search


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search