[TowerTalk] Hy-Gain Towers

Rich L. Boyd rlboyd@CapAccess.org
Thu, 4 Jun 1998 16:15:28 -0400 (EDT)


Even when the factory bases were still available a local, W3IO, opted to 
have one made at a local metal shop, it being considerably less 
expensive.  The result was very nice.  He can probably give you info on 
the shop, etc.  Phone him at 703-641-0719.  Ask for Burt.

73 - Rich, KE3Q


On Thu, 4 Jun 1998, Daniel Baker wrote:

> Hy-Gain has discontinued its tower line.  I called them about the 
> availability of bases for the HG54HD (54 foot crank up) tower.  I was told 
> there are no bases in stock and no material to build a new base.  Since 
> they are discontinued they will not be ordering any additional material. 
>  The tower must be bolted to a Hy-Gain base structure which have special 
> flanges on the end of the tower which mate with flanges on the base.  This 
> allows the tower to fold over at the tower-base point.  It doesn't look 
> like J bolts or similar would work.  Any one have any ideas on how to get a 
> base for one of these Hy-Gain towers?
> Dan K9HZ
> danaf9r@aol.com
> 
> 
> --
> FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
> Submissions:              towertalk@contesting.com
> Administrative requests:  towertalk-REQUEST@contesting.com
> Problems:                 owner-towertalk@contesting.com
> Search:                   http://www.contesting.com/km9p/search.htm
> 

73 - Rich Boyd, KE3Q


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm