[TowerTalk] Are Four Lengths of Solid #4 A Good Sub for 0/0?

[DavidC]

I just noticed that Home Depot sells a 200 foot reel of bare
#4 wire for $36.

If I cut this into four 50 foot lengths and CADwelded it to my
four ground rods would it be an acceptable substitute for a
single run of 0/0?

Will I need to twist the four wires together?

Will the mould for the CADweld process keep the tension off the
individual wires so they don't melt and pull apart?

- Thanks! & 73, DavidC  K1YP
************************************************************************


__________________________________________
NetZero - Defenders of the Free World
Get your FREE Internet Access and Email at
http://www.netzero.net/download/index.html

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm