[TowerTalk] T2X in 25G

Tower2sell@aol.com Tower2sell@aol.com
Fri, 8 Oct 1999 05:23:40 EDT


In a message dated 10/5/1999 8:43:11 PM Central Daylight Time, 
K4LM@worldnet.att.net writes:

> BTW, for the guy in NC who has 75 feet of 25G guyed every 25 feet.  You
>  can put almost anything you want on it.  Rohn specs are at least 2:1
>  safety factory, probably 2.5:1.  The antenna will go away long before
>  the tower unless a tree falls on the guy wires ( that one always bothers
>  me).

Steve is most likely correct, but the allowable loads specified by ROHN are 
the maximum allowed by the building codes for the wind speed specified. The 
building codes specify minimum design strength and wind speed for the 
protection of life. This means it prudent to use a higher than minimum wind 
speed if you care about survival of your antenna tower.

Second, the antenna is connected by a wire that will keep the antenna 
"catching wind" like a sail after it fails. This is why building codes do not 
allow the concept of break away antenas similar to signs.

Tower2sell@aol.com

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm