[TowerTalk] Exothermic Welding?

[Gary McDuffie, Sr.]

On Sun, 24 Oct 1999 11:01:50 EDT, K7LXC@aol.com wrote:

> Another common product is CadWeld. It's available from industrial-type 
> suppliers. The molds run fifty bucks more or less and the shots are $4-5. You 
> need a separate mold for each type of connection. You can spend a hundred 
> bucks or more real easy on this stuff but it's what the pros use.

One shots are $6-7 each here.  Again, you have to know exactly what you
are going to use it for, because each one is specific to a certain rod
size, wire size, and type of connection wanted (butt, join, etc.).  See
your electrical supply house for details.  I have the info sheet for the
ones I used scanned if you want some interesting details.

Gary
-- 
Please notify your ISP if you don't receive this.

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm