[TowerTalk] Rivet Tool?

Curtis, David B david.b.curtis@intel.com
Wed, 27 Oct 1999 11:23:28 -0700


A generic hand riveter from the local hardware store will work fine. It's
even reasonable to do a C3-size antenna for "expedition/FD" style operation,
although for a weekend operation, I leave out some of the rivets to save
both on putting them in and drilling them out again. And I admit I don't
break the antenna down all the way.

But... that said, do any of you on the reflector know of a reasonably priced
power riveter? Ideally a rechargeable electric riveter would be great, but a
small pneumatic one would be cool, tool.

73, Dave N6NZ

-----Original Message-----
From: Greg Gobleman [mailto:k9zm@frontiernet.net]
Sent: Tuesday, October 26, 1999 7:10 PM
To: towertalk@contesting.com
Subject: [TowerTalk] Rivet Tool?



Well, I let my fingers do the walking and I have a Tango 34 on the way.
 Well, at least ordered even though it's not yet sent.)   Never having had a
Force 12 antenna before, I forgot to ask about a rivet tool.  Any
recommendations?

73
Greg K9ZM


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm