[TowerTalk] Brake delay adjustment

[alsopb]

The below should be in the lead from the switch to the cap/relay coil
connection.
73 de Brian/K3KO

alsopb wrote:
> 
> You add a 10 ohm 1/2 watt resistor in series with the relay coil.
> Note: The break delay circuit offered by some does not include it.  I
> do.  I suspect the microswitches (they look pretty macro by today's
> standards) can handle it.
> 
> 73 de Brian/K3KO
>

--
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com