[TowerTalk] installing Rohn hdbx48 with tilt over base

[Pat Chiles]

Larry,

The 1 inch steel rods that I used 17 years ago were bought at a Home Depot
look-a-like from that era.  I am sure they were not hardened steel.  I would
hope that ROHN uses a much better quality.  I would not doubt that they do.

Pat, K8PC
----- Original Message -----
From: wowly <wowly@email.msn.com>
To: Pat Chiles <chilesp@intrepid.net>
Sent: Wednesday, August 16, 2000 8:47 PM
Subject: Re: [TowerTalk] installing Rohn hdbx48 with tilt over base


> Pat,
>
> The 1" threaded rods you mentioned happen to be the ones ROHN uses in
their
> HB-78 hinge base for this tower?
>
> Larry  K8PUJ




--
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com