[TowerTalk] Re: mic wiring an Icom sm8 to a kenwood tr9000

[Dan Evans]

Thanks to all for the replies.

With the info I received, I was able to figure it out:-)  Really appreciate
all the help.

73
Dan

Dan Evans N9RLA
2015 S. Jimtown Ln.
Scottsburg, IN 47170
{EM78}
1/2 of the N9RLA /R no budget Rover Team
Check out the Rover Resource Page at:
http://www.qsl.net/n9rla
----- Original Message -----
From: "Dan Evans" <n9rla@yahoo.com>
To: "homebrew" <homebrew@qth.net>; "VHF Reflector" <vhf@w6yx.stanford.edu>;
<towertalk@contesting.com>
Sent: Sunday, December 03, 2000 6:38 PM
Subject: mic wiring an Icom sm8 to a kenwood tr9000


> Hi All,
>
> A friend brought me a problem today!  He has a Kenwood tr9000 and an Icom
> SM8 mic and wants me to wire it up for him.  No problem, right?  Well, the
> documentation with the mic doesn't tell which wire does what!  I have the
> pin out for the rig, but I need to know where to put which wire...  Can
> anybody tell me which wire is what, [by color] or better yet, just give me
a
> run down of the wiring for sm8 to tr9000?
>
> Thanks for the help, I would hate to let him down as I've been pitching
weak
> signal vhf to him for a long time!
>
> Thanks,
> Dan
>
> Dan Evans N9RLA
> 2015 S. Jimtown Ln.
> Scottsburg, IN 47170
> {EM78}
> 1/2 of the N9RLA /R no budget Rover Team
> Check out the Rover Resource Page at:
> http://www.qsl.net/n9rla
>
>


__________________________________________________
Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger.
http://im.yahoo.com


--
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com