[TowerTalk] Rotor choices today?

[Bob - KF9YH]

I have moved to a new location and finally got a few acres. I am
able to put up a decent tower now (Going to be a Trylon Titan
72 or 80 footer). I have 16' of .25 wall T-6061 tubing I'd like to
use for the mast along with 2 thrust bearings.

I currently have a Ham IV rotor that I used at the old QTH. It
isn't up to the loads of the new system.

I am putting up an F12 C-31XR at the top and an EF240 above it.
A couple of VHF antennas will be above that. I am side mounting 
my old C-3 at about 55'. Along with the mast and a vertical at the
top, the wind load will be approx. 20 sq. ft. I want a little cushion in
there, too. 

Without breaking the bank, what would be a good rotor choice for
my setup? I am in NW Indiana, and do get some pretty good ice
loads (Maybe 2 or 3 a winter). So far, I have looked at the Yaesu
G-1000SDX and the Yaesu 2800. I don't think a Tailtwister gives
me enough cushion to do the job (Plus, they seem to be scarce
nowadays). I have looked through the archives, but everyone's
setup is different.......

Any ideas?

Thank you,

Bob - K9YH

kf9yh@netnitco.net


--
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com