[TowerTalk] TB3
Stan or Patricia Griffiths
w7ni@teleport.com
Mon, 06 Mar 2000 23:10:46 -0800
There is a drawing of a TB3 on my web site at <www.reprise.com> that will show
you the hole pattern in all the detail you need.
Stan w7ni@teleport.com
ValErwin@aol.com wrote:
> Steve:
>
> I have heard the praises of the Rohn TB-3 for years from other esteemed tower
> experts such as you as well! What is so great about it over other bearings?
> What is the hole pattern on the TB-3? Hole diameter for bolts? Does the TB-3
> have a grease fitting? My current bearing with grease fitting is a Fafner
> (sp?) that I bought from a local bearing supplier here in the Dallas area. I
> cut a plastic funnel out that is WX-sealed (inverted) to the mast that rides
> bout' 0.25 inches above the bearing to protect the bearing from the rain.
>
> I am planning on laying my tower over in the next few weeks and adding a 40
> meter element to my CC X7. As my bearing is quite old, I may use that as an
> opportunity to replace the bearing as a matter of preventative
> maintenance-whether it needs it or not. Perhaps the TB-3 is a candidate - if
> it has a grease fitting ??
>
> Steve, as Rohn is a tower manufacturer, I would imagine that one of the
> "biggie bearing companies" manufacturers the TB-3 for Rohn.
>
> Your thoughts are appreciated --
>
> Regards,
>
> Val Erwin
> W5PUT
>
> --
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm