[TowerTalk] Dunestar filter

[k6ll@juno.com]

A while ago, I wrote:


> It's male.
> 
> Pins 1-6 are 160-10M, in order.
> Pin 8 is not used.
> Pin 9 is usually +12VDC, with the individual band pins providing a
> ground for each of the relays, but the filter box can be rewired to 
> where
> the individual band pins provide 12VDC. In that case, pin 9 is
> not used.

Let me add:

Pin 7 is ground.

Why are errors and omissions so much more noticeable when you see the
message come back than before the message is sent?


Dave Hachadorian, K6LL
Yuma, AZ
K6LL@juno.com

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm