[TowerTalk]

[DGB]

Does someone have a .JPG of one of the saddles. I may be
able to machine a qty. of them fairly reasonable.

73 Dwight W9YQ

----- Original Message -----
From: <w2fca@qsl.net>
To: <towertalk@contesting.com>
Sent: Friday, November 10, 2000 12:04 PM
Subject: [TowerTalk]


>
> >Tnx for all who responded to my request on SS
> >u-bolts with a saddle. Looks like Harbach is
> >the only one who has cast aluminum saddles for
> >u-bolts, and he is no longer open for business.
> >Tony
>
> Before I discovered Harbach, I machined the saddles from
luminum
> bar stock that I got from Small Parts. 3/4" by 1/2" was 50
cents
> a linear inch, and 3/4" by 3/4" was about 70 cents per
inch.
> That added 2 bucks to the cost of a 2 inch u-bolt and a
dollar
> for a 1-1/2 incher plus time.
>
> Frank
> W2FCA
>
>
>
>
>
>
> -----
> Sent using MailStart.com (
http://MailStart.Com/welcome.html )
> The FREE way to access your mailbox via any web browser,
anywhere!
>
>
> --
> FAQ on WWW:
http://www.contesting.com/FAQ/towertalk
> Submissions:              towertalk@contesting.com
> Administrative requests:  towertalk-REQUEST@contesting.com
> Problems:                 owner-towertalk@contesting.com
>


--
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com