[TowerTalk] U Bolts

[Michael Tope]

Mike, 

If you end up using SS clamps, make sure you use some kind of anti-seize compound
like Molybednum Disulfide on the threads. SS gauls (seizes) very  easily.  Once this 
happens, you will have to use a hack saw to get the clamps off. 

73 de Mike, W4EF...........
 
----- Original Message ----- 
From: "K0FF" <K0FF@ARRL.NET>
To: "Michael J. O'Connor" <kn9t@webtv.net>; <towertalk@contesting.com>
Sent: Wednesday, October 04, 2000 2:20 PM
Subject: Re: [TowerTalk] U Bolts


> 
> See Mike at M2. He made me a couple of dynamite H frames
>  using 3" and 4" tubing. Uses a lot of U bolts. Not stainless though, ask
> him why.Geo>K0FF
> -----Original Message-----
> From: Michael J. O'Connor <kn9t@webtv.net>
> To: towertalk@contesting.com <towertalk@contesting.com>
> Date: Wednesday, October 04, 2000 3:57 PM
> Subject: [TowerTalk] U Bolts
> 
> 
> 
> Need a supplier of 3 inch U-Bolts with saddles,
> Cant seem to find the 3's with saddles or if I do
> there the muffler clamp Guillotine type.
> Stainless steel or better, Can anyone help.
> 73 Mike KN9T
> 
> 
> --
> FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
> Submissions:              towertalk@contesting.com
> Administrative requests:  towertalk-REQUEST@contesting.com
> Problems:                 owner-towertalk@contesting.com
> 
> 
> 
> --
> FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
> Submissions:              towertalk@contesting.com
> Administrative requests:  towertalk-REQUEST@contesting.com
> Problems:                 owner-towertalk@contesting.com
> 
> 


--
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com