[TowerTalk] Hole Plug Question

[K0FF]

How about body putty like we use on cars? That would stick to wood or metal
siding?
Happy Building, Geo>KØFF
http://homepages.dstream.net/K0FF

----- Original Message -----
From: <ValErwin@aol.com>
To: <mwacker@epix.net>; <towertalk@contesting.com>
Sent: Monday, October 16, 2000 8:16 PM
Subject: [TowerTalk] Hole Plug Question


>
> Mike:
>
> I am sure there are better ways to do this but here is my success story:
>
> I had a similar problem several years ago when I took down a tower.  I
solved
> the problem by going to a cabinet shop and asking for a buncha' sawdust. I
> then mixed the sawdust with Elmers Professional Wood Glue and made a real
> thick  tacky mixture of the stuff. Then, using a putty knife, I simply
> stuffed the goop in the holes leaving a little overhang. When the stuff
> dried, I simple hit it with an electric circular sander. A little touch up
> paint and that was it!
>
> GL
>
> Val
> W5PUT
>
> --
> FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
> Submissions:              towertalk@contesting.com
> Administrative requests:  towertalk-REQUEST@contesting.com
> Problems:                 owner-towertalk@contesting.com
>


--
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com