[TowerTalk] Pse check KT34A dimensions for me.
Maurizio Panicara
i4jmy@iol.it
Fri, 22 Sep 2000 22:11:01 +0200
Rear driven is the longest element, as it's also clearly specified in the
KLM manual.
73,
Mauri I4JMY
----- Original Message -----
From: "David Rich" <kg0us@swbell.net>
To: <towertalk@contesting.com>
Sent: Friday, September 22, 2000 8:39 PM
Subject: [TowerTalk] Pse check KT34A dimensions for me.
>
> I have checked and checked and checked but the reflector half element is
>
> about 0.250" shorter than the rear driven element using the dimensions
> given in my manual. The capacitor end caps are blue.
>
> The dimensions for A, B, C, and D are as follows in my manual:
>
> Director: A=51.000" B=43.000" C=23.750" D=20.000"
>
> Front Driven: A=45.500" B=43.000" C=25.250" D=18.000"
>
> Rear Driven: A=56.500" B=47.000" C=27.000" D=21.000"
>
> Reflector: A=59.250" B=47.250" C=28.000" D=18.000"
>
> The dimensions A + D effect the overall length so for
>
> the rear driven element 56.500" + 21.000" = 77.500"
>
> the reflector element 59.250" + 18.000" = 77.250"
>
> As you can see the overall physical length of the rear driven element is
>
> slightly larger than the reflector.
> If this is not true what is it that I am doing incorrectly?
>
> 73,
>
> Dave kg0us@swbell.net
>
>
> --
> FAQ on WWW: http://www.contesting.com/FAQ/towertalk
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
>
--
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com