[TowerTalk] Tip

[Marc Wullaert]

----- Original Message -----
From: Richard Zalewski <w7zr@redrivernet.com>
To: <towertalk@contesting.com>
Sent: Sunday, September 24, 2000 8:32 PM
Subject: [TowerTalk] Tip


>
> Here is a great product for cleaning aluminum.  3M Marine Aluminum
Restorer and
> Polish.  3M # 051131-09020.  I'm putting a used beam up and applied this
product
> with paper towel and the beam looks like new.  I could feel the db's
rising as I
> was rubbing.
>
> The stuff is real easy to use and no really hard work.  Apply dabs to an
element
> section directly from the container.  Wipe with a paper towel and then
wipe
> again with a clean paper towel.
>
> Dick W7ZR
>
>
>
Thats notting new here  , It's called DX-WAX here , put them up the element,
polish (like you do with the car)and de signals are rising with some db's..
.Come's in tubes for modest antennas and bottels for bigger antennas.

And they believe it !!!!


73
marc
on4ma



--
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com