[TowerTalk] House Entry

[Pete Smith]

At 09:38 AM 4/30/01 EDT, K7LXC@aol.com wrote:
>In a message dated 4/30/01 12:25:03 AM Pacific Daylight Time, 
>n4zr@contesting.com writes:
>
>> You might also want to consider using aluminum sheet, or mounting the
>>  thinner copper on a same-size sheet of plywood for structural strength.
>
>    Don't forget that what you want is to have the sheet mounted on 
>insulating standoffs. If you DO take a strike, you may set your house on
fire 
>if your grounding plate is mounted directly on wood siding. 

I realize there is potential for a leakage path to ground through the wood,
but the intent is for most of the strike energy to go to ground at the
tower end, with the disconnect/grounding panel only taking care of the
leftovers.

73, Pete N4ZR
Contesting is!

The World Contest Station Database 
is waiting for your input at
http://www.qsl.net/n4zr 



List Sponsor:  ChampionRadio.com - Trylon self-supporting towers,
safety equipment, rigging gear, LOOS tension guages & more!
http://www.championradio.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com