[TowerTalk] Re: WTB Positioning Pots

[bill wall]

Hi everyone;
Try mgs4u.com. Allen may have some or know where to find some.Please give TT
the conversion info.
                            Bill Wall KC4UZ
----- Original Message -----
From: "Lonnie (NT6B)" <nt6b-vk7lm@dreamsoft.com>
To: <towertalk@contesting.com>
Sent: Friday, February 02, 2001 1:17 PM
Subject: [TowerTalk] Re: WTB Positioning Pots


> Hello to the group....I am looking for a source for a positioning
> Potentiometer, with the parameters of:  500 Ohms, Wire wound, Single turn
> (very important) precision potentiometer.  This pot will hopefully have a
> shaft approx. 1/4 inch in diameter. I want to change out my Selsyns on my
> prop pitch motor and controller and be able to use a CDE or HyGain control
> box for the dial indicator.  A friend of mine in Europe has made this
> conversion and it seems to work fine for him.
>
> Your input is appreciated...Have a good weekend from Sunny, Warm, Southern
> California.
>
>
> 73's......Lonnie  (NT6B)
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
>
> --
> FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
> Submissions:              towertalk@contesting.com
> Administrative requests:  towertalk-REQUEST@contesting.com
> Problems:                 owner-towertalk@contesting.com
>
>


--
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com