[TowerTalk] Wood posts

Stan Stockton k5go@alltel.net
Fri, 27 Jul 2001 00:02:22 -0500


Tom,

I have found that a good, easy to install, and cheap solution is to use
barbed wire fence posts ("T" Posts) for the first 4 foot or so and then use
the appropriate sized PVC (1.25" I think) that will fit tightly over the top
for the last 2-3 feet.  I then use a hacksaw and cut a slit in the top of
the PVC to hold the wire in place and allow it to be easily stretched
between the supports.  I am using some 18 gauge copper plated steel and can
get by with about one support every 100 foot or so.

Stan, K5GO
----- Original Message -----
From: "Tom Rauch" <w8ji@akorn.net>
To: <towertalk@contesting.com>
Sent: Thursday, July 26, 2001 7:58 AM
Subject: [TowerTalk] Wood posts


>
> I'm planning on using pressure treated 2x4's to support some
> Beverages. I'll just poke some holes in the ground with my tractor's
> post hole digger attachment, and drop the 2x4's in.
>
> Does anyone have any tips on making the wood last longer, or will
> it be OK in direct contact with soil?? Will it last ten years or so?
> 73, Tom W8JI
> W8JI@contesting.com
>
>
> -----
> FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
> Submissions:              towertalk@contesting.com
> Administrative requests:  towertalk-REQUEST@contesting.com
> Problems:                 owner-towertalk@contesting.com
>
>




-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com