[TowerTalk] grounding coax to boom and tower

[N2TK]

What's the recommended hardware to bond the shield of the coax on the house
side of the balun to the boom, mast or tower leg? Based on the input from
towertalk I am going to ground the shield of each coax. Do I use Polyphaser
hardware or ?? I see UNI-Kits listed. Is this the way to go? Do I have to
worry about dissimilar metal problems with the UNI-Kits with either the
coax, boom, or mast? What about soldering copper strap to the coax shield
and clamping it to the boom, or is this what the UNI-Kits do?
Tnx
Tony
N2TK


List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A HREF="http://www.ChampionRadio.com">
www.ChampionRadio.com</A>

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com