[TowerTalk] CATV hardline is sticky

Jerry Kincade w5kp@swbell.net
Wed, 07 Nov 2001 17:03:04 -0600


Jumping right to the chase and skipping over all the environmentally
friendly methods, Birchwood Casey Gun Scrubber. 12 oz can, loca gun shop,
about $8. Use outside only.
73, Jerry W5KP

----- Original Message -----
From: "Kevin Hemsley" <kev@ida.net>
To: <towertalk@contesting.com>
Sent: Wednesday, November 07, 2001 11:40 AM
Subject: [TowerTalk] CATV hardline is sticky


>
> I managed to obtain some 3/4" CATV hardline with which I plan to feed a
new
> horizontal loop. In preparing to install connectors, I discovered that
> underneath the outer black jacket, there is some VERY sticky adhesive
> between the aluminum shield and the black jacket.  Is there something I
can
> use to clean off this adhesive?  It makes putting on connectors very
messy.
>
> Thanks,
>                 Kevin.
> ------------------------------------------------------
> Kevin Hemsley
> Systems Engineer
> Microserv Computer Technologies, Inc.
> kev@ida.net
> KB7TYA
>
>
>
>
> List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
> Trylon Titan towers, coax, hardline and more. Also check out our self
> supporting towers up to 100 feet for under $1500!!
http://www.anwireless.com
>
> -----
> FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
> Submissions:              towertalk@contesting.com
> Administrative requests:  towertalk-REQUEST@contesting.com
> Problems:                 owner-towertalk@contesting.com
>


List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!!  http://www.anwireless.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com