[TowerTalk] Fw: T2X Mounting Template

[pringle50@home.com]

----- Original Message -----
From: <pringle50@home.com>
To: <W5LT@aol.com>
Sent: Thursday, November 29, 2001 9:31 PM
Subject: T2X Mounting Template


> Robert:
>
> If you don't find a manual there in Richardson, I'll be glad to
trace
> the one in my manual on some vellum drafting paper and you can lay
it
> on the surface of your rotor plate and center punch the holes if you
> like.
> Thats the way I did mine and its fine.  The holes are 11/32" and
there
> are six of them.  The template is not dimensioned so you really need
a
> tracing to do it.  DO NOT USE A PHOTOCOPY UNLESS YOU ARE POSITIVE IT
> IS A REPRODUCTION AT EXACTLY 100% ! ! ! ! !
>
> Either give me a ring on the telephone at AC 601 264-4320 or E-Mail
me
> at one of the 3 addys below and let me know if you need my help.
>
> 73,
> J. Leon Pringle, Jr  W 5 N A
>      w5na@megagate.com
>      w5na@mdxa.org
>      pringle50@home.com
>
>
>



List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!!  http://www.anwireless.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com