[TowerTalk] TailTwister Bolt Pattern Template

n0tt1@juno.com n0tt1@juno.com
Fri, 30 Nov 2001 01:18:37 +0000


Hi Bob,

All you have to do is tape a thin piece of paper to the bottom,
then rub the paper over the holes with the "side" of a lead pencil
point.  Your pattern will then be transferred to the paper.

73,
Charlie, N0TT



On Thu, 29 Nov 2001 20:05:10 EST ROBKEL@aol.com writes:
> 
> I need to obtain a mounting bolt drill template for a TailTwister. I 
> bought a 
> rebuilt one from Norm's Service, and the manual did not include the 
> template.
> The tower mounting shelf is for the 4 bolt rotator versions, and I 
> need to 
> add the other two holes (and check what's already there).
> You can provide private reply to W5LT@aol.com.
> Thanks
> Bob W5LT
> 
> List Sponsored by AN Wireless:  AN Wireless handles Rohn tower 
> systems,
> Trylon Titan towers, coax, hardline and more. Also check out our 
> self
> supporting towers up to 100 feet for under $1500!!  
> http://www.anwireless.com
> 
> -----
> FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
> Submissions:              towertalk@contesting.com
> Administrative requests:  towertalk-REQUEST@contesting.com
> Problems:                 owner-towertalk@contesting.com
> 

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.

List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!!  http://www.anwireless.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com