[TowerTalk] EZ way tower and Mast

[Mark Ackaway]

I just got my EZ way delivered and it seems to be in good shape.  It
is a 2 part crank up fold over and fully extened it is about 51'.  It
had a mast on it at one time, but not sure how high.  It has 3 plates
at the top for a 2" mast.  The bottom plate is about 5' from the top
of the tower.  I would like to add about 15' to this tower using a
mast.  Would a 20' mast be ok on this tower?  Should I use steel or
aluminum?  I will only be putting a small 24" omni directional antenna
at the top and a small 18"x2" radio box.  Combined weight will be less
than 5 lbs.

Once again thanks for all the help you guys have been giving me on
this.

  

 Mark                          mailto:ackster@pcsonline.com



List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 96 feet for under $1500!!  http://www.anwireless.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com