[Towertalk] stripping enameled wire

[Ronald KA4INM Youvan]

> Is here anything out there that strips enameled wire for soldering easily
> instead if scrapping it with a knife?

 
  In the olden times `magnet wire' had enamel on it. (color-less paint)

Pain strippers will soften and remove these true enamels.

   Lately wire is coated with various resins' such as `spar varnish' a phenol
resin, Formvar, Solvar, Nysol, Polyurethane, Polyesterimide, Polyimide and
others, these higher temperature and more flexible coatings are quite resistant
to stripping products.
-- 
        73 (= Best Regards) de: Ron ka4inm@tampabay.rr.com
     100% Slack. since July, 1997 (still free!) SENT D&T are UTC
        Visit my HAM Web SITE at: http://www.qsl.net/ka4inm