[Towertalk] Tower Safety

[J.P. Kleinhaus]

Oops...that second size should have read 5/8" (NOT 5/16").

J.P.

----- Original Message -----
From: "Herbert Sweet" <k2gbh@arrl.net>
To: <towertalk@contesting.com>
Sent: Monday, May 27, 2002 8:13 PM
Subject: [Towertalk] Tower Safety


> Our club  (Poughkeepsie ARC) needs to replace its aging rope that is used
for guying and pulling up
> towers.  We put up three 40 ft Rohn towers, each with its own beam.  The
beams are 3 element 20
> meters, 3 element 15 meters, and 5 element 10 meters.
>
> Some time ago I calculated the maximum stress on the pull up rope,
probably at about a 20 degree
> angle,  as being in the neighborhood of 350 pounds. We use a battery
powered windless to do the
> lifting.
>
> We have been looking at the black dacron that is supplied by several of
the ham supplies companies.
> It comes in 3/16 770 lb breaking strength, 5/16 1250 lbs, and 7/17 2150
lbs.  Are any of these
> suitable?  If not, what would you recommend?
>
>
>
> _______________________________________________
> Towertalk mailing list
> Towertalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk