[Towertalk] Power ground rod driver

David k4zzr@bellsouth.net
Tue, 26 Nov 2002 21:20:01 -0500


I put a 5/8" sleeve on my ground rods to keep them from mushrooming and used
a chain link post driver available from Home Depot for about $20.  Probably
not as quick and easy as the $400 gizmo but it worked like a charm putting
in my 20 rods without too much work.

73, David, K4ZZR

Subject: RE: [Towertalk] Power ground rod driver


> Here is another approach that is about half the cost
> http://www.remdriver.com/ground-rod-drivers.htm
>
> Or this one, same general concept just a few different models
> http://www.demrk.com/Ground.htm
>
> And the last one that is a complete tool
>
> http://www.condux.com/products/aerial/dddrvr.htm
> (this one is probably the one I like best as far as this type of tool
> goes)
>
>
> But if you have access to a DeWalt or Black & Decker Hammer Drill there
> are a couple bits that fit the
> Spline for these drills that allow driving ground rods with them. And
> speaking from experience working
> With this type drill going thru slab foundations for termite work, I
> would whole heartedly recommend
> Using the drill if you have access to one, the bit is 50 or 60 and is
> available from Grainger or a few other
> Suppliers.
>
>
> Just my 2 cents worth, or maybe it is like 10 cents.
>
> ------------------------------------------------------------------------
> | John von Gonten   -  N5BSD     | ERROR 406: file corrupt:
> | Grid Square: EM12lr            | config.earth --- reboot universe?
> | Email : N5BSD@ARRL.Net         | (Y/N)
>
> | WEB   : http://www.rblprd.com  |
> | WEB2  : http://n5bsd.dyndns.ws |
>
> ------------------------------------------------------------------------
>
>
> -----BEGIN GEEK CODE BLOCK-----
> GO d- s a- C++ BL* P+ L++ E--
> W++++ N+ o++ K- w+ !O M V- !PS
> PE+ Y+ PGP++ t 5 X+ R tv++ b++
> DI+ D G e>e+ h! r++ y++>* UF++
> ------END GEEK CODE BLOCK---
>
>
> -----Original Message-----
> From: towertalk-admin@contesting.com
> [mailto:towertalk-admin@contesting.com] On Behalf Of Mark
> Sent: Tuesday, November 26, 2002 5:50 PM
> To: towertalk@contesting.com
> Subject: Re: [Towertalk] Power ground rod driver
>
>
> Please note .. the rod pounder costs 400 bux!
> Try Harbor Freight!    =];?}
> ----- Original Message -----
> From: "David" <k4zzr@bellsouth.net>
> To: <towertalk@contesting.com>
> Sent: Tuesday, November 26, 2002 3:28 PM
> Subject: Re: [Towertalk] Power ground rod driver
>
>
> > .....alright guys....put your rod back in your pants.
> >
> > :-)
> >
> > >
> > > Nice driver!  But what's that red thingy in her hands?
> > >
> > > 73 de
> > > Gene Smar  AD3F
>
>
>
> _______________________________________________
> AN Wireless Self Supporting Towers at discounted prices,
> See http://www.mscomputer.com
>
> Wireless Weather Stations now $349.95. Call Toll Free,
> 888-333-9041 for additional information.
> _______________________________________________
> Towertalk mailing list
> Towertalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
>
> _______________________________________________
> AN Wireless Self Supporting Towers at discounted prices,
> See http://www.mscomputer.com
>
> Wireless Weather Stations now $349.95. Call Toll Free,
> 888-333-9041 for additional information.
> _______________________________________________
> Towertalk mailing list
> Towertalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>