[TowerTalk] Rotor Wiring Sequence Help

[Jim Rhodes]

#1 is ground for everything--motor, brake & pot (if MY memory serves me 
right). #2 is the brake hot lead

At 11:03 PM 8/2/03, K7LXC at aol.com wrote:
>In a message dated 8/2/03 7:20:58 PM Pacific Daylight Time,
>w8aef at worldnet.att.net writes:
>
> > The two heavy wires are to power the brake.  As I recall the TR-44 doesn't
> >  have a brake so they can go anywhere.
>
>     Are you sure? I thought they were for the motor.
>
>     Of course I was working on a HAM IV today but don't have the manual.
>
>Cheers,
>Steve     K7LXC
>
>_______________________________________________
>
>See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless 
>Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with 
>any questions and ask for Sherman, W2FLA.
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk at contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk

Jim Rhodes K0XU
jim at rhodesend.net