[TowerTalk] Rotor Wiring Sequence Help

[Robert Shauger]

Your memory has it right...

73, Bob AI7M

----- Original Message ----- 
From: "Jim Rhodes" <k0xu at iowadsl.net>
To: <towertalk at contesting.com>
Sent: Saturday, August 02, 2003 9:21 PM
Subject: Re: [TowerTalk] Rotor Wiring Sequence Help


> #1 is ground for everything--motor, brake & pot (if MY memory serves me
> right). #2 is the brake hot lead
>
> At 11:03 PM 8/2/03, K7LXC at aol.com wrote:
> >In a message dated 8/2/03 7:20:58 PM Pacific Daylight Time,
> >w8aef at worldnet.att.net writes:
> >
> > > The two heavy wires are to power the brake.  As I recall the TR-44
doesn't
> > >  have a brake so they can go anywhere.
> >
> >     Are you sure? I thought they were for the motor.
> >
> >     Of course I was working on a HAM IV today but don't have the manual.
> >
> >Cheers,
> >Steve     K7LXC
> >
> >_______________________________________________
> >
> >See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
> >Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with
> >any questions and ask for Sherman, W2FLA.
> >
> >_______________________________________________
> >TowerTalk mailing list
> >TowerTalk at contesting.com
> >http://lists.contesting.com/mailman/listinfo/towertalk
>
> Jim Rhodes K0XU
> jim at rhodesend.net
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>