[TowerTalk] SWR question

SavageBR at aol.com SavageBR at aol.com
Fri Feb 28 08:21:44 EST 2003


The only difference in the signal level at the DX location will be the added 
feedline loss of option B due to the slightly higher SWR. Obviously that 
depends on the frequency and the type of feedline. In any practical setup you 
would never detect a difference.

Otherwise, a good SWR is only important when transferring power from your 
source, the transmitter, into the feedline. If the transmitter will deliver 
the desired power into the feedline Z present at the transmitter end, and the 
feedline is rated to handle the peak voltage of the standing wave then there 
is no problem.

Bruce  AA4Z 


More information about the TowerTalk mailing list